FLYMIND INDEPENDENT R&D

FLYM-PV02W500-A1

2.5W (2500mW) High-Power 80CH 5.8GHz Wireless Drone Video Transmitter

Built on high-frequency Rogers 4350B PCB substrate with integrated CNC radiator fan. Features SmartAudio control, Pit Mode, 5-second slow power-on delayed startup protection, and wide 12-28V (6S battery) voltage input.

Rogers 4350B PCB 2.5W Peak Power Built-in Cooling Fan 5s Slow Power-On 80 Channels
Input Voltage: 12-28V (2~6S Lipo)
RF Output Power: 25mW / 2.5W Switchable
Antenna Port: MMCX Interface
Mounting Pattern: 30.5 x 30.5mm Standard
Dimensions / Weight: 36x36x8mm / 23g
BEC Output: 5V OUT for Camera
INQUIRE B2B WHOLESALE QUOTE OPEN ORIGINAL PDF
CORE ARCHITECTURE

Product Features & Engineering Highlights

Rogers 4350B High-Frequency PCB

Adopts high-performance Rogers 4350B RF PCB substrate, providing low dielectric loss and outstanding high-frequency RF transmission stability across extreme temperature ranges.

CNC Aluminum Shell & Built-In Fan

High-strength CNC aviation aluminum alloy casing provides thermal conductivity, mechanical protection, and integrated active cooling fan to ensure 2.5W continuous output without thermal throttling.

5-Second Slow Power-On Protection

Integrated 5-second startup delay waits before powering on the RF power amplifier, completely preventing high-power VTX burnout caused by maximum instantaneous voltage spikes upon battery plug-in.

80CH Band Frequency Support

Supports 80 frequency channels (4.8GHz to 6.1GHz) with arbitrary frequency points and customizable frequency combinations (1MHz step). Fully compatible with SmartAudio (SA) protocol.

Pit Mode & Flight Line Tuning

Supports Pit Mode for safe frequency and channel selection on the flight line without emitting high RF power that could disrupt other active drone operators.

Wide Input Voltage (12-28V) & 5V OUT

Directly supports 2S to 6S Lipo batteries (12V@800mA / 28V@300mA power consumption) with dedicated 5V regulated output to power FPV / HD cameras.

DATASHEET SPECIFICATIONS

Technical Specifications Table

Model NameFLYM-PV02W500-A1
Input Voltage12-28V (6S battery suggested, 2S-6S compatible)
Output Voltage (BEC)5V DC Output for Camera Power Supply
Number of Channels80 CH (4.8GHz - 6.1GHz Range, 1MHz Step)
RF Output Power25mW / 2.5W (2500mW Peak) Switchable
Mounting Hole Spacing30.5mm x 30.5mm Standard Flight Controller Pattern
Antenna ConnectorMMCX Interface
Power Consumption12V @ 800mA (9.6W) | 28V @ 300mA (8.4W)
Thermal ManagementCNC Aluminum Radiator Shell + Built-in Active Cooling Fan
Built-in MicrophoneNot Supported
Wiring Cable HarnessJST 6-Pin Connector (Single 12-28V Input, Single GND, SA, 5V-OUT, GND, CVBS)
Module Weight23g Ultra-Lightweight Design
Physical Dimensions36mm x 36mm x 8mm
USER INTERFACE

Button Control & LED Indicator Logic

  • Press & Hold Button: Select function mode (Green indicator light turns ON).
  • Press Briefly: Select gear (Blue indicator light turns ON).

1. Power Level LED Indicator Table:

LED State 25mW Output 2.5W Output
LED-4--
LED-3--
LED-2-
LED-1-
PINOUT DIAGRAM

JST 6-Pin Wiring & Mechanical Specs

FLYM-PV02W500-A1 Pinout Diagram
FREQUENCY MATRIX

Band and Channel Frequency Table (80CH)

Full frequency map across 10 RF bands (Band A, b, E, F, r, P, L, U, O, X) covering 4.8GHz to 6.1GHz.

Band / Channel CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
Band A5865 MHz5845 MHz5825 MHz5805 MHz5785 MHz5765 MHz5745 MHz5725 MHz
Band b5733 MHz5752 MHz5771 MHz5790 MHz5809 MHz5828 MHz5847 MHz5866 MHz
Band E5705 MHz5685 MHz5665 MHz5645 MHz5885 MHz5905 MHz5925 MHz5945 MHz
Band F5740 MHz5760 MHz5780 MHz5800 MHz5820 MHz5840 MHz5860 MHz5880 MHz
Band r5658 MHz5695 MHz5732 MHz5769 MHz5806 MHz5843 MHz5880 MHz5917 MHz
Band P5653 MHz5693 MHz5733 MHz5773 MHz5813 MHz5853 MHz5893 MHz5933 MHz
Band L5333 MHz5373 MHz5413 MHz5453 MHz5493 MHz5533 MHz5573 MHz5613 MHz
Band U5325 MHz5348 MHz5366 MHz5384 MHz5402 MHz5420 MHz5438 MHz5456 MHz
Band O5474 MHz5492 MHz5510 MHz5528 MHz5546 MHz5564 MHz5582 MHz5600 MHz
Band X4990 MHz5020 MHz5050 MHz5080 MHz5110 MHz5140 MHz5170 MHz5200 MHz